Seat Alhambra 2018

User Manual - Page 136

For ALHAMBRA 2018.

PDF File Manual, 392 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Operation
It lights up
Main beam on or flasher on
page 134.
It lights up
Headlight adjustment (Light Assist) on
page 136.
Several warning and control lamps light up
for a fe
w seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
Observe the safety warnings
in Con-
trol and warning l
amps on page 109.
Switching lights on and off
Read the additional information carefully
page 26
The driver is personally responsible for the
correct use and adjustment of the lights in all
situations.
In vehicles with a trailer hook: if the trailer is
connected electrically and is fitted with a
rear fog light, the vehicle’s fog light is auto-
matically switched off.
Audible warnings to advise the driver that
the lights have not been switched off
If the key is not in the ignition and the driver
door is open, an audible warning signal is
heard in the following cases: this will remind
you to turn the light off.
When the parking light is on
page 134.
When the light switch is in position .
WARNING
The side lights or daytime driving lights are
not bright enough to illuminate the r
oad
ahead and to ensure that other road users
are able to see you.
Always use your dipped beam head
lights if it is raining or if visibility is poor.
WARNING
If the headlights are set too high and the
main beam is not used correctly, there is a
risk of dazzling or distr
acting other road
users. This could result in a serious acci-
dent.
Always make sure that the headlights are
correctly adjusted.
Never use the main beam or headlight
flasher when it can dazzle others on the
road.
Note
The legal requirements regarding the use
of vehicle lights in each country must be
observ
ed.
Turn signal and main beam lever
Read the additional information carefully
page 26
Convenience turn signals
For the one-touch signalling, when the igni-
tion is switched on, move the lever as far as
possible upwards or downwards and release
the lever. The turn signal will flash three times.
The control turn signals are switched on and
off from the menu Lights & Visibility on
the instrument panel display
page 28.
This function can be disconnected at a speci-
alised workshop for those vehicles which do
not have the menu Lights & Visibility.
Note
If the convenience turn signal
s are oper-
ating (three flashes) and the other conven-
ience turn signals are switched on, the ac-
tive part stops flashing and only flashes
once in the new part selected.
The turn signal only works when the igni-
tion is switched on. The hazard warning
134
Loading ...
Loading ...
Loading ...