Loading ...
Loading ...
Loading ...
Operation
SEAT distinguishes between services with en-
gine oil change (Int
erv
al Service) and serv-
ices
without engine oil change (Inspection
Service). The service interval display only
gives information for service dates which in-
volve an engine oil change. The dates for the
other services (e.g. the next Inspection Serv-
ice or change of brake fluid) are listed on the
label attached to the door strut, or in the
Maintenance Programme.
In vehicles with Services established by
time or mileage, the service intervals are al-
ready pre-defined.
In vehicles with LongLife Service, the inter-
vals are determined individually. Technical
progress has made it possible to considera-
bly reduce servicing requirements. The tech-
nology used by SEAT ensures that your vehi-
cle only has an Interval Service when it is
necessary. To determine the Maintenance
Service (max. 2 years), the vehicle's condi-
tions of use and individual driving styles are
considered. The service pre-warning first ap-
pears 20 days before the date established
for the corresponding service. The kilometres
(miles) remaining until the next service are al-
ways rounded up to the nearest 100 km
(miles) and the time is given in complete
days. The current service message cannot be
viewed until 500 km after the last service. Pri-
or to this only lines are visible on the display.
Inspection reminder
When the Service date is approaching, when
the ignition is switched on a Service remind-
er is displayed.
In vehicles without text messages, a spanner
symbol is displayed on the instrument
panel and a figure given in km. The number of
kilometres shown is the maximum number
that may be driven until the next service. After
a few seconds, the display mode changes. A
clock symbol appears and the number of
days until the next service appointment is
due.
In vehicles with text messages, Service in
--- km (miles) or --- days is displayed
on the instrument panel.
Service due
After the service date, an audible warning is
given when the ignition is switched on and the
spanner displayed on the screen flashes
for a few seconds. In vehicles with text mes-
sages, Service in --- km or --- days is
displayed on the instrument panel.
Check a service warning
With the ignition switched on, the engine off
and the vehicle at a standstill, the current
service notification can be read:
●
Press the button on the instrument panel
several times until the spanner symbol is
displayed.
●
OR: select the Settings menu.
●
From the Service submenu, select the op-
tion Info.
When the service date has past, a minus
sign is displayed in front of the number of kilo-
metres or days. In vehicles with text messag-
es the following is displayed: Service ---
km (miles) or --- days ago.
Resetting service interval display
If the service was not carried out by a techni-
cal service centre, the display can be reset as
follows:
In vehicles with text messages:
Select the Settings menu.
In the submenu Service, select the option Reset.
Confirm with OK when requested to do so by the
system.
In vehicles without text messages:
Switch the ignition off.
Press and hold the 0.0 / SET button.
Switch the ignition back on.
108
Loading ...
Loading ...
Loading ...