Loading ...
Loading ...
Loading ...
4. Maintain the device.
Reboot
The device starts reboong.
Restore Default Sengs
Restore the device sengs to the default ones, excluding the
IP address.
Restore All
Restore the device parameters to the default ones. The
device should be
acvated aer restoring.
5. Remotely upgrade the device.
1) In the Remote Upgrade part, select an upgrade type.
Note
●
You need to set the device ID before upgrading if you
select Controller Upgrade File as the remote upgrade
type.
●
Only the card reader that connected via RS-485 protocol
supports upgrading.
2) Click ... to select an upgrade le.
3) Click Upgrade to start upgrading.
Note
Do not power o during the upgrading.
7.11.5 Manage Network User
Steps
1. Click Maintenance and Management → Device Management
→ Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3. Click System → User → Network User .
4. Click Add to add the user.
5. Oponal: Select a user in the user list and click Edit to edit the
user.
You are able to edit the user password, the IP address, the
MAC address and the user permission.
6. Click OK.
7.11.6 Manage Keyfob User
Steps
1. Click Maintenance and Management → Device Management
→ Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3. Click System → User → Keyfob User .
4. Click Add to add the user.
5. Check Enable in the pop-up window and set the keyfob's serial
No.
6. Oponal: Enable the Remain Open Status of the turnsle.
79
Loading ...
Loading ...
Loading ...