Loading ...
Loading ...
Loading ...
Note
●
Only one turnsle can pair the keyfob. If mulple turnsles
are in the pairing mode, the keyfob will select only one of
them to pair.
●
For details about DIP switch value and meaning, see DIP
Switch.
6. Oponal: Go to System → User → Keyfob User on the remote
control page of the client soware to delete the keyfob.
5.2 Inialize Device
Steps
1. Remove the JP11 jumper cap on the access control board.
Figure 5-1 Inializaon Jumper Cap
2. Disconnect the power and reboot the device. The device
buzzer buzzes a long beep.
3. When the beep stopped, plug the jumper cap back.
4. Disconnect the power and power on the device again.
Cauon
The inializaon of the device will restore all the parameters to
the default seng and all the device events are deleted.
24
Loading ...
Loading ...
Loading ...