Hikvision DS-K3Y501SX User Manual

Loading ...

7. Conrm to add the person.

Click Add to add the person and close the Add Person

window.

Click Add and New to add the person and

connue to add

other persons.

Note

Once the ngerprint is added, the ngerprint type cannot be

changed.

7.4.8 Collect Fingerprint via Access Control Device

When adding person, you can collect ngerprint informaon via

the access control device's ngerprint module. The ngerprints

recorded can be used as credenals of the persons to access the

authorized doors.

Before You Start

Make sure

ngerprint collecon is supported by the access

control device.

Steps

1. Enter Person module.

2. Select an

organizaon in the organizaon list to add the person

and click Add.

Note

Enter the person's basic informaon rst. For details about

conguring person's basic informaon, refer to Congure Basic

Informaon.

3. In the Credenal → Fingerprint panel, click +.

4. In the pop-up window, select the collecon mode as Remote.

5. Select an added access control device or the enrollment staon

from the drop-down list.

Note

If you select the enrollment staon, you should click Login, and

set IP address, port No., user name and password of the

device.

6. Collect the ngerprint.

1) Click Start.

2) Place and li your ngerprint on the ngerprint scanner of

the selected access control device to collect the

ngerprint.

3) Click Add to save the recorded ngerprint.

7. Conrm to add the person.

Click Add to add the person and close the Add Person

window.

Click Add and New to add the person and

connue to add

other persons .

7.4.9

Congure Access Control Informaon

When adding a person, you can set her/his access control

informaon, such as binding an access control group with the

person, conguring PIN code, seng the person as a visitor, a

blocklist person, or a super user, etc.

Steps

1. Enter Person module.

Loading ...

Hikvision DS-K3Y501SX Pro Flap Barriers

User Manual - Page 57