Loading ...
Loading ...
Loading ...
Note
●
The supplied interconnecng cable length is 5.5 m.
●
The suggested inner diameter of the low voltage conduit is
larger than 30 mm.
●
If you want to bury both of the AC power cord and the low
voltage cable at the entrance, the two cables should be in
separated conduits to avoid interference.
●
If you want to bury both of the AC power cord and the low
voltage cable at the entrance, the two cables should be in
separated conduits to avoid interference.
●
The external AC power cord should be double-insulated.
●
The network cable must be CAT5e or the network cable has
beer performance. And the suggested network cable
length should be less than 100 m.
Figure 2-3 Wire Face Recognion Terminal
Note
●
The le pedestal and the middle pedestal should bury
interconnecng cables for connecng the face recognion
terminal.
●
The face recognion terminal installed on the le pedestal
will gain power from the sub switch, which should connect
to high voltage.
●
The supplied
interconnecng cable length is 5.5 m.
●
The suggested inner diameter of the low voltage conduit is
larger than 30 mm.
●
If you want to bury both of the AC power cord and the low
voltage cable at the entrance, the two cables should be in
separated conduits to avoid interference.
●
If more peripherals are required to connect, you should
increase the conduit diameter or bury another conduit for
the external cables.
3
Loading ...
Loading ...
Loading ...