Loading ...
Loading ...
Loading ...
Example
You can control entrance & exit and manage aendance aer
adding access control devices to the client; you can perform video
intercom with the indoor staons and door staons.
7.2.1 Add Device
The client provides three device adding modes including by IP/
domain, IP segment, and ISUP protocol. The client also supports
imporng mulple devices in a batch when there are large
amount of devices to be added.
Add Online Device
The acve online devices in the same local subnet with the client
soware will be displayed on the Online Device area. You can
click Refresh Every 60s to refresh the informaon of the online
devices.
Add a Detected Online Device
You can select a detected online device displayed in the online
device list and add it to the client.
Steps
1. Enter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Select an online device in the Online Device area, and click Add
to open the device adding window.
Note
For the inacve device, you need to create the password for it
before you can add the device properly. For detailed steps,
refer to .
5. Enter the required informaon.
Name
Enter a descripve name for the device.
IP Address
Enter the device's IP address. The IP address of the device is
obtained
automacally in this adding mode.
Port
You can customize the port number. The port number of the
device is obtained automacally in this adding mode.
User Name
By default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters,
including at least three kinds of following categories: upper
case leers, lower case leers, numbers, and special
29
Loading ...
Loading ...
Loading ...