Loading ...
Loading ...
Loading ...
Send an email nocaon about the event to one or more
receivers.
For details about seng email parameters, refer to Set
Email Parameters in the user manual of the client
soware.
2) Click OK.
5. Enable the event so that when the event is detected, event will
be sent to the client and the linkage acons will be triggered.
6. Oponal: Click Copy to to copy the event sengs to other
access control device, alarm input, door, or card reader.
7.8.2 Congure Device Acons for Access Event
You can set the access control device's linkage acons for the
access control device's triggered event. Aer that, when an event
is triggered, it can trigger the alarm output, buzzer on access
controller, and other
acons.
Steps
Note
The linkage acons should be supported by the device.
1. Click Access Control → Linkage Conguraon .
2. Select the access control device from the list on the le.
3. Click Add to add a new linkage.
4. Select Event Linkage as the event source.
5. select the event type and detailed event to set the linkage.
6. In the Linkage Target area, set the property target to enable
this
acon.
Buzzer on Controller
The audible warning of access control device will be
triggered.
Capture
An event-related picture will be captured when the selected
event happens.
Recording
An event-related picture will be captured when the selected
event happens.
Note
The device should support recording.
Buzzer on Reader
The audible warning of card reader will be triggered.
Alarm Output
The alarm output will be triggered for nocaon when the
selected event happens
Alarm Input
Arm or disarm the alarm input.
Note
The device should support alarm input funcon.
Access Point
69
Loading ...
Loading ...
Loading ...