Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42209475-ds-k3y501sx/bg37.png)
Note
Enter the person's basic informaon rst. For details, refer to
Congure Basic Informaon.
3. Click Add Face in the Basic Informaon area.
4. Select Take Photo to enter Take Photo window.
5. Oponal: Enable Verify by Device to check whether the
captured face photo can meet the uploading requirements.
6. Take a photo.
1) Face to the camera and make sure your face is in the middle
of the
collecng window.
2)
Click to capture a face photo.
3)
Oponal: Click to capture again.
4) Click OK to save the captured photo.
Figure 7-3 Take a Photo via Client
7. Conrm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and
connue to add
other persons.
7.4.6 Collect Face via Access Control Device
When adding person, you can collect the person's face via access
control device added to the client which supports facial
recognion funcon.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person
and click Add.
Note
Enter the person's basic informaon rst. For details about
conguring person's basic informaon, refer to Congure Basic
Informaon.
3. Click Add Face in the Basic Informaon panel.
40
Loading ...
Loading ...
Loading ...