Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42209475-ds-k3y501sx/bg36.png)
This eld is only available when the model is DS-K1F100-D8,
DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card,
then you can enable the M1 Card Encrypon funcon and
select the sector of the card to encrypt.
7. Click OK to conrm the operaon.
8. Place the card on the card enrollment staon, and click Read to
get the card number.
The card number will display in the Card No. eld
automacally.
9. Click Add.
The card will be issued to the person.
7.4.4 Upload a Face Photo from Local PC
When adding person, you can upload a face photo stored in local
PC to the client as the person's prole.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person
and click Add.
Note
Enter the person's basic informaon rst. For details about
conguring person's basic informaon, refer to Congure Basic
Informaon.
3. Click Add Face in the Basic Informaon panel.
4. Select Upload.
5. Select a picture from the PC running the client.
Note
The picture should be in JPG or JPEG format and smaller than
200 KB.
6. Oponal: Enable Verify by Device to check whether the facial
recognion device managed in the client can recognize the face
in the photo.
7.
Conrm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and
connue to add
other persons .
7.4.5 Take a Photo via Client
When adding a person, you can take a photo of the her/him via
the client and set this photo as the person's prole.
Before You Start
Make sure PC running the client has a camera or you have
connected other USB camera to the PC.
Steps
1. Enter Person module.
2. Select an
organizaon in the organizaon list to add the person
and click Add to enter Add Person window.
39
Loading ...
Loading ...
Loading ...