Loading ...
Loading ...
Loading ...
Figure 3-2 Dimension
1. Prepare for the installaon tools, check the components, and
prepare for the installaon base.
2. Drill holes on the ground according to the installaon holes on
the pedestals and insert the expansion sleeves.
3. Seal the
boom of the turnsle to avoid water from entering.
4. According to the entrance and exit marks on the pedestals,
move the pedestals to the corresponded posions.
Figure 3-3 Entrance Mark on Pedestal
Note
Make sure the installaon holes on the pedestals and the base
are aligned with each other.
5. Secure the pedestals with expansion bolts.
Note
●
Do not immerse the pedestal in the water. In special
circumstances, the immersed height should be no more than
150 mm.
●
The installaon footprint is as follows:
5
Loading ...
Loading ...
Loading ...