Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42209475-ds-k3y501sx/bg51.png)
Note
You can authencate by the rst person again to disable the
rst person mode.
4. Click Add on the First Person List panel.
5. Select person(s) in the le list and the person(s) will be add to
the selected persons as the rst person(s) of the doors.
The added rst person(s) will list in the First Person List
6. Oponal: Select a rst person from the list and click Delete to
remove the person from the
rst person list.
7. Click Save.
7.7.7 Congure An-Passback
The an-passback feature is designed to minimizes the misuse or
fraudulent use of access
credenals such as passing back card to
an unauthorized person, or tailed access. The an-passback
funcon establishes a specic sequence in which access
credenals must be used in order to grant access. You can set the
sequence according to the actual path via the client and if the
person uses the
credenal in wrong sequence, you can also reset
the an-password records.
Before You Start
Add access control device to the client, and enable the an-
passing
back funcon of the access control device.
Steps
Note
Either the an-passing back or mul-door interlocking funcon
can be congured for an access control device at the same me.
For the conguraon of mul-door interlocking, refer to .
1. Click Access Control → Advanced Funcon → An-Passback to
enter the An-Passpack Sengs page.
2. Select an access control device on the le panel.
3. Select a card reader as the beginning of the path in the First
Card Reader
eld.
4.
Click of the selected rst card reader in the Card Reader
Aerward column to open the select card reader dialog.
5. Select the aerward card readers for the rst card reader.
Note
Up to four aerward card readers can be added as aerward
card readers for one card reader.
6. Click OK in the dialog to save the selecons.
7. Click Save in the An-Passback Sengs page to save the
sengs and take eect.
Example
Set Card Swiping Path: If you select Reader In_01 as the
beginning, and select Reader In_02, Reader Out_04 as the
linked card readers. Then you can only get through the access
control point by swiping the card in the order as Reader In_01,
Reader In_02 and Reader Out_04.
66
Loading ...
Loading ...
Loading ...