Hikvision DS-K3Y501SX User Manual

Loading ...

Note

The displayed parameters may vary for dierent access control

devices.

Name

Edit the card reader name as desired.

Exit Buon Type

You can set the exit

buon as remaining closed or remaining

open. Usually, it is remaining open.

Open Duraon

Aer swiping the normal card and relay acon, the me for

locking the door starts working.

Door

Le Open Timeout Alarm

The alarm can be triggered if the door has not been closed in

a congured me period. If it is set as 0, no alarm will be

triggered.

Super Password

The specic person can open the door by inpung the super

password.

5. Some of the following parameters are not listed in the Basic

Informaon page, click Advanced to edit the parameters.

Duress Code

The door can open by inpung the duress code when there

is duress. At the same

me, the client can report the duress

event.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer

of the card reader (by entering the dismiss code on the

keypad).

Note

●

The duress code, super code, and dismiss code should be

dierent.

●

The duress code, super password, and the dismiss code

should be dierent from the authencaon password.

●

The length of duress code, super password, and the dismiss

code is according the device, usually it should contains 4 to 8

digits.

6. Click OK.

7. Oponal: Click Copy to , and then select the door(s) to copy

the parameters in the page to the selected doors(s).

Note

The door's status duraon sengs will be copied to the

selected door(s) as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card

reader parameters.

Loading ...

Hikvision DS-K3Y501SX Pro Flap Barriers

User Manual - Page 71