Hikvision DS-K3Y501SX User Manual

Loading ...

Before You Start

●

Get the SADP soware from the supplied disk or the ocial

website hp://www.hikvision.com/en/ , and install the SADP

according to the prompts.

●

The device and the PC that runs the SADP tool should be within

the same subnet.

The following steps show how to

acvate a device and modify its

IP address. For batch acvaon and IP addresses modicaon,

refer to User Manual of SADP for details.

Steps

1. Run the SADP

soware and search the online devices.

2. Find and select your device in online device list.

3. Input new password (admin password) and conrm the

password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend

you create a strong password of your own choosing (using a

minimum of 8 characters, including upper case leers, lower

case leers, numbers, and special characters) in order to

increase the security of your product. And we recommend you

reset your password regularly, especially in the high security

system,

reseng the password monthly or weekly can beer

protect your product.

Click

Acvate to start acvaon.

Status of the device becomes Acve aer successful acvaon.

5. Modify IP address of the device.

1) Select the device.

2) Change the device IP address to the same subnet as your

computer by either modifying the IP address manually or

checking Enable DHCP.

3) Input the admin password and click Modify to

acvate your

IP address modicaon.

6.2 Acvate Device via Client Soware

For some devices, you are required to create the password to

acvate them before they can be added to the soware and work

properly.

Steps

Note

This funcon should be supported by the device.

1. Enter the Device Management page.

Loading ...

Hikvision DS-K3Y501SX Pro Flap Barriers

User Manual - Page 42