Loading ...
Loading ...
Loading ...
Figure 7-10 Set Authencaon Modes for Card Readers
6. Oponal: Select a congured day and click Copy to Week to
copy the same sengs to the whole week.
7. Oponal: Click Copy to to copy the sengs to other card
readers.
8. Click Save.
7.7.6
Congure First Person In
You can set mulple rst persons for one access control point.
Aer the rst person is authorized, it allows mulple persons
access the door or other
authencaon acons.
Before You Start
●
Add access control device to the client, and make sure the
device supports the rst person in funcon.
●
Add person and assign access authorizaon to designed
person. For details, refer to Person Management and Set
Access Group to Assign Access Authorizaon to Persons.
Steps
1. Click Access Control → Advanced
Funcon → First Person In to
enter the First Person In page.
2. Select an access control device in the list on the le panel.
3. Select the current mode as Enable Remaining Open aer First
Person, Disable Remaining Open
aer First Person, or
Authorizaon by First Person from the drop-down list for each
access control point of the selected device.
Enable Remaining Open
aer First Person
The door remains open for the congured me duraon
aer
the rst person is authorized unl the remain open
duraon ends. If you select this mode, you should set the
remain open duraon.
Note
The remain open duraon should be between 0 and 1440
minutes. By default, the remain open duraon is 10 minutes.
Disable Remaining Open aer First Person
Disable the funcon of rst person in, namely normal
authencaon.
Authorizaon by First Person
All authencaons (except for the authencaons of super
card, super password, duress card, and duress code) are
allowed only
aer the rst person authorizaon.
65
Loading ...
Loading ...
Loading ...