Loading ...
Loading ...
Loading ...
Networking
CONNECTING THE PRINTER TO A WI-FI NETWORK
Before you begin, make sure that:
• Active Adapter is set to Auto. From the control panel, navigate to SSeettttiinnggss > NNeettwwoorrkk//PPoorrttss > NNeettwwoorrkk
OOvveerrvviieeww > AAccttiivvee AAddaapptteerr.
For non-touch-screen printer models, press
to navigate through the settings.
• The Ethernet cable is not connected to the printer.
Using the Wireless Setup Wizard in the Printer
• These instructions apply only to some printer models.
• Before using the wizard, make sure that the printer firmware is updated. For more information, see Updating
Software.
1. From the home screen, touch WWii--FFii icon, then touch SSeett uupp nnooww.
2. Select a Wi-Fi network, and then type the network password.
3. Touch DDoonnee.
Using the Settings Menu in the Printer
1. From the control panel, navigate to:
SSeettttiinnggss >> NNeettwwoorrkk//PPoorrttss >> WWiirreelleessss >> SSeettuupp OOnn PPrriinntteerr PPaanneell
For non-touch-screen printer models, press
to navigate through the settings.
2. Select a Wi-Fi network, and then type the network password.
Note: For Wi-Fi-network-ready printer models, a prompt to set up the Wi-Fi network appears during initial
setup.
CONNECTING THE PRINTER TO A WIRELESS NETWORK USING WI-FI PROTECTED SETUP (WPS)
Before you begin, make sure that:
• The access point (wireless router) is WPS-certified or WPS-compatible. For more information, see the
documentation that came with your access point.
• A wireless network adapter is installed in your printer. For more information, see the instructions that came with
the adapter.
• Active Adapter is set to Auto. From the control panel, navigate to:
SSeettttiinnggss > NNeettwwoorrkk//PPoorrttss > NNeettwwoorrkk OOvveerrvviieeww > AAccttiivvee AAddaapptteerr
For non-touch-screen printer models, press
to navigate through the settings.
Xerox
®
B225/B235 Multifunction Printer User Guide 67
Set up, install, and configure
Loading ...
Loading ...
Loading ...