Loading ...
Loading ...
Loading ...
Change the Printer Settings
76
3
Print Position / Sensor 3
If RD Rolls are being used, you do not need to adjust the sensors.
1 Printing Reference Point Adjustment Along Label Width / Printing Reference Point Adjustment
Along Label Length
Adjust the position of the reference point (point of origin for printing). This corrects printing misalignments
resulting from differences in printer models or from the fixed margins of some software.
The reference point cannot be adjusted for raster printing.
Available settings: [Along Label Width]: -5.91 in. to 5.91 in. (-150.0 mm to 150.0 mm), [Along Label
Length]: -0.39 in. to 0.39 in. (-10.0 mm to 10.0 mm)
2Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: -0.39 in. to 0.39 in. (-10.0 mm to 10.0 mm)
3 Media Sensor (Transmissive/Gap)
The following transmissive/gap sensor parameters can be adjusted.
[Detection Sensitivity]
Adjust the precision of the sensor that detects the gaps (spacing) for die-cut labels.
Available settings: -2–+2
[Luminescence Adjustment]
Adjust the amount of light emitted by the transmissive/gap sensor.
Available settings: -2–+2
1
2
3
4
Loading ...
Loading ...
Loading ...