Loading ...
Loading ...
Loading ...
Set Up the Printer
22
1
Recharge the Battery 1
While Installed in the Printer 1
To charge the rechargeable Li-ion battery (PA-BT-006), insert it into the printer and do the following:
Note
• Before using the battery, use the following procedure to charge it.
• Print speed varies with the available battery power.
a Make sure that the battery is installed in the printer.
b Use the compatible Brother AC adapter (PA-AD-600A) and the AC power cord to connect the printer to
an AC power outlet (see How to Recharge the Battery with the AC Adapter (Optional) on page 23), or
use the Brother compatible car adapter (PA-CD-600CG) to connect the printer to a DC power outlet (see
How to Recharge the Battery with the Car Adapter (Optional) on page 24).
Note
• The LED indicator light is orange when the battery is charging.
When the battery is fully charged, the LED indicator turns off (when power is turned off) or lights in green
(when power is turned on).
• Charging time is approximately 4 hours. It varies on the environmental conditions.
• Due to the temperature of the battery, charging may stop if the ambient temperature is outside the
following range: 32°F to 104°F (0°C to 40°C).
• The recommended charging temperature range for the battery is from 41°F to 95°F (5°C to 35°C).
Loading ...
Loading ...
Loading ...