Loading ...
Loading ...
Loading ...
Change the Printer Settings
51
3
Menu Bar 3
1 Apply Settings to the Printer
Applies the settings to the printer.
2 Save Settings in Command File
Saves the specified settings in a command file. The file extension is .bin.
The saved command file can be used with the mass storage mode to apply the settings to a printer. (See
Mass Storage Mode on page 90.)
Note
If the [Disable these settings] check box is selected, the settings in that tab are not saved.
Important
• The following information is not saved with the command file:
• Node name
• IP address, subnet mask and default gateway (when the IP address is set to [STATIC])
• The saved communication settings commands are intended to be used only for applying settings to a
printer. To apply the settings to the printer using this command file, use the mass storage mode.
• Saved command files contain authentication keys and passwords. We recommend storing command files
only if necessary.
• Do not send the command file to a different printer model.
6
10
11
7
1
2
3
4
5
8
9
Loading ...
Loading ...
Loading ...