Loading ...
Loading ...
Loading ...
CONSULT-II Application Items
NAEL0454
“HEADLAMP”
NAEL0454S01
Data Monitor
NAEL0454S0101
Monitored Item Description
IGN ON SW Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW Indicates [ON/OFF] condition of ignition switch in ACC position.
AUTO LIGT SW
Displays status of the lighting switch as judged from the lighting switch signal.
(AUTO position: ON/Other than AUTO position: OFF)
AUTO LIGT SENS
Displays “Illumination outside of the vehicle (close to 5V when light/close to 0V when dark)” as
judged from the optical sensor signal.
LIGHT SW 1ST
Displays status of the lighting switch as judged from the lighting switch signal.
(1ST or 2ND position: ON/Other than 1ST and 2ND position: OFF)
LIGHT SW 2ND
Displays status of the lighting switch as judged from the lighting switch signal.
(2ND position: ON/Other than 2ND position: OFF)
DOOR SW-DR Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS Indicates [ON/OFF] condition of door switch RH.
DOOR SW-RR Indicates [ON/OFF] condition of rear door switch.
Active Test
NAEL0454S0102
Test Item Description
TAIL LAMP Tail lamp relay can be operated by on-off operation of the tail lamp.
HEAD LAMP Headlamp relay can be operated by on-off operation of the headlamp.
AUTO LIGHT Night time dimming signal can be operated by on-off operation.
Work Support
NAEL0454S0103
Work Item Description
AUTO LIGHT SET
Auto light sensitivity can be changed in this mode. Sensitivity can be adjusted in four modes.
I MODE 1 (Normal)/MODE 2 (Sensitive)/MODE 3 (Desensitized)/MODE 4 (Insensitive)
BATTERY SAVER SET
Exterior lamp battery saver control mode can be changed in this mode. Selects exterior lamp
battery saver control mode between two modes.
I MODE 1 (ON)/MODE 2 (OFF)
ILL DELAY SET
Auto light delay off timer period can be changed in this mode. Selects auto light delay off timer
period among eight modes.
I MODE 1 (45 sec.)/MODE 2 (OFF)/MODE 3 (30 sec.)/MODE 4 (60 sec.)/ MODE 5 (90 sec.)/
MODE 6 (120 sec.)/MODE 7 (150 sec.)/MODE 8 (180 sec.)
Trouble Diagnoses
NAEL0277
Symptom Possible cause Repair order
No lamps operate (including head-
lamps).
1. 7.5A fuse
2. Lighting switch
3. Smart entrance control unit
1. Check 7.5A fuse [No. 24, lacated in fuse block
(J/B)]. Verify battery positive voltage is present at
terminal 49 of smart entrance control unit.
2. Check lighting switch.
3. Check smart entrance control unit. (EL-378)
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
PARKING, LICENSE AND TAIL LAMPS
CONSULT-II Application Items
EL-69
Loading ...
Loading ...
Loading ...