Loading ...
Loading ...
Loading ...
Test Item Description
MULTI ANSWER BACK SET Hazard and horn reminder mode can be changed with this mode. Selects hazard and horn
reminder mode among six steps (EL-311).
AUTO LOCK SET Auto door lock mode can be selected among the following periods:
I MODE 1 (5 min.)/MODE 2 (OFF-Mode)/MODE 3 (1 min.)
PANIC ALARM SET The panic alarm button’s pressing time on keyfob can be selected among the following periods:
I MODE 1 (0.5 sec.)/MODE 2 (OFF-Mode)/MODE 3 (1.5 sec.)
TRUNK OPENER The trunk lid opener button’s pressing time on keyfob can be selected among the following peri-
ods:
I MODE 1 (0.5 sec.)/MODE 2 (OFF-Mode)/MODE 3 (1.5 sec.)
PW DOWN SET The unlock button’s pressing time on keyfob can be selected among the following periods:
I MODE 1 (3 sec.)/MODE 2 (OFF-Mode)/MODE 3 (5 sec.)
NOTE:
Even though TRUNK OPENER is actually displayed on the CONSULT-II screen, it is not equipped, therefore, they cannot be activated.
Trouble Diagnoses
NAEL0397
SYMPTOM CHART
NAEL0397S01
NOTE:
I Always check keyfob battery before replacing keyfob.
I The panic alarm operation of remote keyless entry system
does not activate with the ignition key inserted in the ignition
key cylinder.
Symptom Diagnoses/service procedure
Reference
page
(EL- )
All functions of remote keyless entry system do
not operate.
1. Keyfob battery and function check 323
2. Power supply and ground circuit for smart entrance control
unit check
324
3. Replace keyfob. Refer to ID Code Entry Procedure.
NOTE: If the result of keyfob function check with CONSULT-II is
OK, keyfob is not malfunctioning.
336
The new ID of keyfob cannot be entered. 1. Keyfob battery and function check 323
2. Key switch (insert) check 328
3. Door switch check 326
4. Door lock/unlock switch LH check 329
5. Power supply and ground circuit for smart entrance control
unit check
324
6. Replace keyfob. Refer to ID Code Entry Procedure.
NOTE: If the result of keyfob function check with CONSULT-II is
OK, keyfob is not malfunctioning.
336
Door lock or unlock does not function.
(If the power door lock system does not operate
manually, check power door lock system. Refer to
EL-297)
1. Keyfob battery and function check 323
2. Replace keyfob. Refer to ID Code Entry Procedure.
NOTE: If the result of keyfob function check with CONSULT-II is
OK, keyfob is not malfunctioning.
336
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REMOTE KEYLESS ENTRY SYSTEM
CONSULT-II Application Items (Cont’d)
EL-321
Loading ...
Loading ...
Loading ...