Loading ...
Loading ...
Loading ...
2 CHECK DOOR SWITCH INPUT SIGNAL
With CONSULT-II
Check driver door switch signal (“DOOR SW-DR”) in “DATA MONITOR” mode with CONSULT-II.
SEL319W
Without CONSULT-II
Check voltage between smart entrance control unit harness connector M121 terminal 1 (G/R) and ground.
SEL996X
OK or NG
OK © GO TO 4.
NG © GO TO 3.
3 CHECK DRIVER SIDE DOOR SWITCH
Check continuity between terminals 2 and 3.
SEL383X
OK or NG
OK © Check the following.
I Driver side door switch ground circuit and condition
I Harness for open or short between smart entrance control unit and driver side door
switch
NG © Replace driver side door switch.
WARNING CHIME
Trouble Diagnoses (Cont’d)
EL-158
Loading ...
Loading ...
Loading ...