Loading ...
Loading ...
Loading ...
NOTE:
I If a keyfob is lost, the ID code of the lost keyfob must be erased
to prevent unauthorized use. A specific ID code can be erased
with CONSULT-II. However, when the ID code of a lost keyfob
is not known, all keyfob ID codes should be erased. After all
ID codes are erased, the ID codes of all remaining and/or new
keyfob must be re-registered.
To erase all ID codes in memory, register one ID code (keyfob)
four times. After all ID codes are erased, the ID codes of all
remaining and/or new keyfob must be re-registered.
I When registering an additional keyfob, the existing ID codes in
memory may or may not be erased. If four ID codes are stored
in memory, when an additional code is registered, only the
oldest code is erased. If less than four ID codes are stored in
memory, when an additional ID code is registered, the new ID
code is added and no ID codes are erased.
I If you need to activate more than two additional new keyfob,
repeat the procedure “Additional ID code entry” for each new
keyfob.
I Entry of maximum four ID codes is allowed. When more than
four ID codes are entered, the oldest ID code will be erased.
I Even if the same ID code that is already in the memory is input,
the same ID code can be entered. The code is counted as an
additional code.
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REMOTE KEYLESS ENTRY SYSTEM
ID Code Entry Procedure (Cont’d)
EL-337
Loading ...
Loading ...
Loading ...