Loading ...
Loading ...
Loading ...
MEL222P
LOW BEAM
NAEL0262S01
1. Remove aiming adjusting screw cap.
2. Turn headlamp low beam on.
3. Use adjusting screws to perform aiming adjustment.
I First tighten the adjusting screw all the way and then
make adjustment by loosening the screw.
SEL376X
If the vehicle front body has been repaired and/or the headlamp
assembly has been replaced, check aiming. Use the aiming chart
shown in the figure.
I Basic illuminating area for adjustment should be within
the range shown on the aiming chart. Adjust headlamps
accordingly.
HEADLAMP (FOR USA)
Aiming Adjustment (Cont’d)
EL-44
Loading ...
Loading ...
Loading ...