Loading ...
Loading ...
Loading ...
DOOR, HOOD AND GLASS HATCH SWITCH CHECK
=NAEL0406S04
Door Switch Check
NAEL0406S0401
1 PRELIMINARY CHECK
1. Turn ignition switch OFF and remove key from ignition key cylinder.
“SECURITY” indicator lamp should blink every 2.6 seconds.
2. Close all doors, hood and glass hatch.
3. Lock doors with multi-remote controller from inside the vehicle.
“SECURITY” indicator lamp should turn on for 30 seconds.
4. Unlock any door with the door lock knob and open the door within 30 seconds after door is locked.
“SECURITY” indicator lamp should turn off.
OK or NG
OK © Door switch is OK, and go to hood switch check.
NG © GO TO 2.
2 CHECK DOOR SWITCH INPUT SIGNAL
With CONSULT-II
Check door switches (“DOOR SW-RR”, “DOOR SW-DR” and “DOOR SW-AS”) in “DATA MONITOR” mode with CON-
SULT-II.
SEL024Y
Without CONSULT-II
Check voltage between smart entrance control unit harness connector M121 terminals 1 (G/OR), 2 (Y) or 3 (R/L) and
ground.
SEL021YA
Refer to wiring diagram in EL-347.
OK or NG
OK © Door switch is OK, and go to hood switch check.
NG © GO TO 3.
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
VEHICLE SECURITY (THEFT WARNING) SYSTEM
Trouble Diagnoses (Cont’d)
EL-357
Loading ...
Loading ...
Loading ...