Loading ...
Loading ...
Loading ...
Smart Entrance Control Unit Inspection Table
NAEL0410
Terminal
No.
Wire
color
Connections Operated condition
Voltage
(Approximate val-
ues)
1 G/OR Driver door switch OFF (Closed) , ON (Open) 12V , 0V
2 Y Passenger door switch OFF (Closed) , ON (Open) 5V , 0V
3 R/L Rear door switch OFF (Closed) , ON (Open) 5V , 0V
4 LG/R Door lock & unlock switches Neutral , Unlocks 5V , 0V
5 BR Door lock & unlock switches Neutral , Locks 5V , 0V
6 Y/B Hood switch ON (Open) , OFF (Closed) 0V , 12V
7 W/G Auto light sensor (Signal)
Ignition switch ON
position
Light is applied to auto light sen-
sor.
1to5V
Light is not applied to auto light
sensor.
Less than 1V
8 L/R Auto light sensor (GND) — —
9 GY Auto light sensor (Power) Ignition switch (OFF , ON) 0V , 5V
10 LG
Door key cylinder unlock
switch
OFF (Neutral) , ON (Locked) 5V , 0V
11 Y Door key cylinder lock switch OFF (Neutral) , ON (Locked) 5V , 0V
12 W/PU Back door key cylinder switch OFF (Neutral) , ON (Unlock) 5V , 0V
13 L/W Glass hatch switch ON (Open) , OFF (Closed) 0V , 12V
14 OR Rear window defogger switch OFF , ON (Only when pushed) 5V , 0V
19 R/G Tail lamp relay (Output)
Ignition switch
(with lighting
switch 1ST or
2ND)
ON or START
, OFF position
More than 5
minutes after
ignition switch is
turned to OFF
position
12V
Within 5 min-
utes after igni-
tion switch is
turned to OFF
position
0V
ON or START position 0V
Headlamps illuminate by auto light control. (Operate
, Not operate)
Less than 1V ,
12V
20 G Tail lamp switch Light switch (OFF or AUTO , 1ST or 2ND position) 12V , 0V
21 PU/R Headlamp LH relay
Ignition switch
(with lighting
switch 2ND)
ON or START
, OFF position
More than 5
minutes after
ignition switch is
turned to OFF
position
12V
Within 5 min-
utes after igni-
tion switch is
turned to OFF
position
0V
ON or START position 0V
Headlamps illuminate by auto light control. 0V
SMART ENTRANCE CONTROL UNIT
Smart Entrance Control Unit Inspection Table
EL-378
Loading ...
Loading ...
Loading ...