Loading ...
Loading ...
Loading ...
Component Parts and Harness Connector
Location
NAEL0263
SEL288Y
System Description
NAEL0264
The headlamp system for Canada vehicles contains a daytime light control unit that activates the high beam
headlamps at approximately half illumination whenever the engine is running. If the parking brake is applied
before the engine is started the daytime lights will not be illuminated. The daytime lights will illuminate once
the parking brake is released. Thereafter, the daytime lights will continue to operate when the parking brake
is applied.
And battery saver system is controlled by the smart entrance control unit.
Power is supplied at all times
I to headlamp LH relay terminals 1 and 3
I through 15A fuse (No. 60, located in the fuse and fusible link box), and
I to headlamp RH relay terminals 1 and 3
I through 15A fuse (No. 59, located in the fuse and fusible link box), and
I to smart entrance control unit terminal 49
I through 7.5A fuse [No. 24, located in the fuse block (J/B)].
Ground is supplied
I to daytime light control unit terminal 16 and
I to smart entrance control unit terminals 43 and 64
When the ignition switch is in the ON or START position, power is also supplied
I to daytime light control unit terminal 3, and
I to smart entrance control unit terminal 27
I through 7.5A fuse [No. 11, located in the fuse block (J/B)].
When the ignition switch is in the ACC or ON position, power is supplied
I to smart entrance control unit terminal 26
I through 10A fuse [No. 10, located in the fuse block (J/B)].
When the ignition switch is in the START position, power is supplied
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
HEADLAMP (FOR CANADA) — DAYTIME LIGHT SYSTEM —
Component Parts and Harness Connector Location
EL-45
Loading ...
Loading ...
Loading ...