Loading ...
Loading ...
Loading ...
I When the door switch signal changes from ON to OFF while the exterior lamp battery saver is activated,
the operation is discontinued, restarts and lasts for 45 seconds, then the headlamps will be turned off.
I When the door switch signal changes from OFF to ON while the exterior lamp battery saver is activated,
the operation is discontinued, restarts and lasts for 45 seconds, then the headlamps will be turned off.
I When the one of four door switch signals changes from OFF to ON while the exterior lamp battery saver
is activated, the operation is discontinued, restarts and lasts for 5 minutes, then the headlamps will be
turned off.
I When all the door switch ON signals are input while the exterior lamp battery saver is activated, the saver
is discontinued and restarts and lasts for 45 seconds, then the headlamps will be turned off.
I Exterior battery saver control time can be changed using “WORK SUPPORT” mode in “HEADLAMP”.
When the lighting switch is turned from OFF to 2ND after headlamps are turned to off by the exterior lamp
battery saver control, ground is supplied
I to smart entrance control unit terminals 20 and 58 from lighting switch terminal 11, and then,
I to headlamp LH and RH relays terminal 2 from smart entrance control unit terminals 21 and 59,
I through smart entrance control unit terminals 22 and 60 and
I through lighting switch terminal 12.
Then headlamps illuminate again.
AUTO LIGHT OPERATION
NAEL0264S03
For auto light operation, refer to “HEADLAMP” (EL-33).
DAYTIME LIGHT OPERATION
NAEL0264S04
With the engine running, the lighting switch in the OFF or 1ST position and parking brake released, power is
supplied
I through daytime light control unit terminal 7
I to terminal 3 of headlamp RH
I through terminal 1 of headlamp RH
I to daytime light control unit terminal 9
I through daytime light control unit terminal 6
I to terminal 3 of headlamp LH.
Ground is supplied to terminal 1 of headlamp LH.
I through daytime light control unit terminals 10 and 16
I through body grounds E13 and E41.
Because the high beam headlamps are now wired in series, they operate at half illumination.
OPERATION
NAEL0264S05
After starting the engine with the lighting switch in the “OFF” or “1ST” position, the headlamp high beam auto-
matically turns on. Lighting switch operations other than the above are the same as conventional light sys-
tems.
Engine With engine stopped With engine running
Lighting switch
OFF 1ST 2ND OFF 1ST 2ND
ABCABCABCABCABCABC
Headlamp
High beam X X O X X O O X O g* g*Og* g*OOXO
Low beam XXXXXXXOXXXXXXXXOX
Clearance and tail lamp X X X OOOOOOXXXOOOOOO
License and instrument illumination
lamp
XXXOOOOOOXXXOOOOOO
A: “HIGH BEAM” position
B: “LOW BEAM” position
C: “FLASH TO PASS” position
O : Lamp “ON”
X : Lamp “OFF”
g : Lamp dims. (Added functions)
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
HEADLAMP (FOR CANADA) — DAYTIME LIGHT SYSTEM —
System Description (Cont’d)
EL-47
Loading ...
Loading ...
Loading ...