Loading ...
Loading ...
Loading ...
3 CHECK REAR WINDOW DEFOGGER SWITCH INPUT SIGNAL
With CONSULT-II
Select “REAR DEF SW” in “DATA MONITOR” mode with CONSULT-II.
SEL352W
Without CONSULT-II
Check continuity between smart entrance control unit harness connector M121 terminal 14 (OR) and ground.
SEL999X
OK or NG
OK © GO TO 4.
NG © Check the following.
I Rear window defogger switch (Refer to EL-183.)
I Harness for open or short between smart entrance control unit and rear window defog-
ger switch
I Rear window defogger switch ground circuit
4 CHECK POWER SUPPLY AND IGNITION INPUT SIGNAL
Check voltage between smart entrance control unit harness connector M122 terminal 27 (W/B), M123 terminal 49 (G/R)
and ground.
SEL001Y
OK or NG
OK © GO TO 5.
NG © Check the following.
I 7.5A fuse [No. 11 or No. 24, located in the fuse block (J/B)]
I Harness for open or short between smart entrance control unit and fuse
REAR WINDOW DEFOGGER
Trouble Diagnoses (Cont’d)
EL-182
Loading ...
Loading ...
Loading ...