Loading ...
Loading ...
Loading ...
6 CHECK REAR AND BACK DOOR SWITCHES INPUT SIGNAL
With CONSULT-II
Check door switches (“DOOR SW-RR”) in “DATA MONITOR” mode with CONSULT-II.
SEL154YA
Without CONSULT-II
Check voltage between smart entrance control unit harness connector M121 terminal 3 (R/L) and ground.
SEL155Y
OK or NG
OK © GO TO 8.
NG © GO TO 7.
7 CHECK REAR AND BACK DOOR SWITCHES
1. Disconnect door switch harness connector.
2. Check the following.
I Continuity between rear door switches connector B18 and B71 terminal 1 and ground
I Continuity between back door switch connector D208 terminals 1 and 2
SEL279Y
OK or NG
OK © Check the following.
I Rear LH, RH and/or back door switch ground circuit or door switch ground condition
I Harness for open or short between smart entrance control unit and rear LH, RH and/or
back door switch
NG © Replace rear LH, RH and/or back door switch.
INTERIOR, SPOT, VANITY MIRROR AND LUGGAGE ROOM LAMPS
Trouble Diagnoses for Interior Lamp Timer (Cont’d)
EL-106
Loading ...
Loading ...
Loading ...