Loading ...
Loading ...
Loading ...
HAZARD REMINDER CHECK
=NAEL0397S07
1 CHECK HAZARD INDICATOR
Check if hazard indicator flashes with hazard switch.
Does hazard indicator operate?
Yes © GO TO 2.
No © Check “hazard indicator” circuit.
2 CHECK HAZARD REMINDER OPERATION WITH CONSULT-II
With CONSULT-II
1. Select “ACTIVE TEST” in “MULTI REMOTE ENT” with CONSULT-II.
2. Select “HAZARD” and touch “ON”.
SEL347W
NOTE: If CONSULT-II is not available, skip this procedure and go to the next step.
OK or NG
OK © Hazard reminder operation is OK.
NG © Replace smart entrance control unit.
3 CHECK HAZARD REMINDER OPERATION WITHOUT CONSULT-II
Without CONSULT-II
Apply ground to smart entrance control unit harness connector M122 terminal 47 (GY/L) and 48 (GY/R).
SEL027Y
Refer to wiring diagram in EL-317.
OK or NG
OK © System is OK.
NG © Replace smart entrance control unit.
REMOTE KEYLESS ENTRY SYSTEM
Trouble Diagnoses (Cont’d)
EL-330
Loading ...
Loading ...
Loading ...