Loading ...
Loading ...
Loading ...
DIAGNOSTIC PROCEDURE 6
=NAEL0369S09
(Sliding motor check)
1 CHECK OUTPUT SIGNAL TO SLIDING MOTOR
Check voltage between seat control unit LH terminals 3 or 10 and ground.
SEL619W
OK or NG
OK © GO TO 2.
NG © Replace seat control unit LH.
2 CHECK SLIDING MOTOR
1. Disconnect sliding device LH connector.
2. Apply 12V DC direct current to motor and check operation.
SEL620WA
OK or NG
OK © Check harness for operation between seat control unit LH and sliding motor.
NG © Replace sliding motor.
AUTOMATIC DRIVE POSITIONER
Trouble Diagnoses (Cont’d)
EL-238
Loading ...
Loading ...
Loading ...