Loading ...
Loading ...
Loading ...
DIAGNOSTIC PROCEDURE 2
=NAEL0369S05
(Sliding encoder check)
1 CHECK SLIDING ENCODER OUTPUT SIGNAL
Measure voltage between seat control unit LH terminal 18 and ground with CONSULT-II or oscilloscope when power seat
slide is operated.
SEL603W
OK or NG
OK © Sliding encoder is OK.
NG © GO TO 2.
2 CHECK SLIDING ENCODER INPUT SIGNAL
Check voltage between seat control unit LH terminal 17 and ground.
SEL604W
OK or NG
OK © GO TO 3.
NG © Replace seat control unit LH.
AUTOMATIC DRIVE POSITIONER
Trouble Diagnoses (Cont’d)
EL-230
Loading ...
Loading ...
Loading ...