Loading ...
Loading ...
Loading ...
REMOTE CONTROLLER BATTERY AND FUNCTION
CHECK
=NAEL0397S02
1 CHECK REMOTE CONTROLLER BATTERY
Remove battery (refer to EL-338) and measure voltage across battery positive and negative terminals, (+) and (−).
Voltage [V]:
2.5 - 3.0
NOTE:
Keyfob does not function if battery is not set correctly.
SEL237W
OK or NG
OK © GO TO 2.
NG © Replace battery.
2 CHECK REMOTE CONTROLLER FUNCTION
With CONSULT-II
Check keyfob function (“LK BUTTON/SIG”, “UN BUTTON/SIG”, “PANIC BTN”, “UN BUTTON ON” and “LK/UN BTN ON”)
in “DATA MONITOR” mode with CONSULT-II.
SEL423Y
NOTE:
Even though TRUNK BTN/SIG is actually displayed on the CONSULT-II screen, it is not equipped, therefore, they cannot
be activated.
OK or NG
OK © Keyfob is OK. Further inspection is necessary. Refer to “SYMPTOM CHART”, EL-321.
NG © Replace keyfob. Refer to ID Code Entry Procedure.
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
REMOTE KEYLESS ENTRY SYSTEM
Trouble Diagnoses (Cont’d)
EL-323
Loading ...
Loading ...
Loading ...