Loading ...
Loading ...
Loading ...
Component Parts and Harness Connector
Location
NAEL0254
SEL288Y
System Description
NAEL0255
The headlamp operation is controlled by the lighting switch which is built into the combination switch and smart
entrance control unit. And the headlamp battery saver system is controlled by the smart entrance control unit.
OUTLINE
NAEL0255S01
Power is supplied at all times
I to headlamp LH relay terminals 1 and 3
I through 15A fuse (No. 60, located in the fuse and fusible link box), and
I to headlamp RH relay terminals 1 and 3
I through 15A fuse (No. 59, located in the fuse and fusible link box), and
I to smart entrance control unit terminal 49
I through 7.5A fuse [No. 24, located in the fuse block (J/B)].
When the ignition switch is in the ON or START position, power is supplied
I to smart entrance control unit terminal 27
I through 7.5A fuse [No. 11, located in the fuse block (J/B)].
When the ignition switch is in the ACC or ON position, power is supplied
I to smart entrance control unit terminal 26
I through 10A fuse [No. 10, located in the fuse block (J/B)]
Ground is supplied
I to smart entrance control unit terminals 43 and 64
I through body grounds M77 and M111.
POWER SUPPLY TO LOW BEAM AND HIGH BEAM
NAEL0255S02
When lighting switch is in 2ND or PASS position, ground is supplied
I to headlamp relay (LH and RH) terminal 2 from smart entrance control unit terminals 21 and 59
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
HEADLAMP (FOR USA)
Component Parts and Harness Connector Location
EL-31
Loading ...
Loading ...
Loading ...