Loading ...
Loading ...
Loading ...
DIAGNOSTIC PROCEDURE 2
NAEL0295S02
SYMPTOM: Interior lamp timer does not cancel properly.
1 CHECK IGNITION ON SIGNAL
With CONSULT-II
Check ignition switch ON signal (“IGN ON SW”) in “DATA MONITOR” mode with CONSULT-II.
SEL318W
Without CONSULT-II
Check voltage between smart entrance control unit harness connector M122 terminal 27 (W/B) and ground.
SEL995X
OK or NG
OK © GO TO 2.
NG © Check the following.
I 7.5A fuse [No. 11, located in fuse block (J/B)]
I Harness for open or short between smart entrance control unit and fuse
INTERIOR, SPOT, VANITY MIRROR AND LUGGAGE ROOM LAMPS
Trouble Diagnoses for Interior Lamp Timer (Cont’d)
EL-112
Loading ...
Loading ...
Loading ...