2002 NISSAN PATHFINDER User Manual

Loading ...

System Description

NAEL0323

WIPER OPERATION

NAEL0323S01

Power Supply and Ground

NAEL0323S0101

With ignition switch in the ACC or ON position, power is supplied

I through 10A fuse [No. 29, located in the fuse block (J/B)]

I to rear wiper motor terminal 4.

When the glass hatch switch is OPEN, ground is supplied

I to rear wiper motor terminal 6

I through glass hatch switch terminal 1 and 2

I through body grounds B11, B22 and D210.

Ground is supplied

I to rear wiper motor terminal 8

I through body grounds B11, B22 and D210.

Wiper Operation

NAEL0323S0102

When the rear wiper switch is turned ON, ground is supplied

I to rear wiper motor terminal 2

I through combination switch terminals 22 and 24

I through body grounds E13 and E41.

Then, power is supplied

I to rear wiper motor terminal 4.

Ground is supplied

I to rear wiper motor terminal 8

I through body grounds B11, B22 and D210.

With power and ground supplied, the wiper motor operates.

Auto Stop Operation

NAEL0323S0103

With rear wiper switch turned OFF, rear wiper motor will continue to operate until wiper arm reaches rear wiper

stopper.

Then wiper motor turns the other way and wiper arm moves once until wiper arm reaches stopper.

Intermittent Operation

NAEL0323S0104

The rear wiper motor operates the wiper arms at low speed approximately every 7 seconds.

When the wiper switch is placed in the INT position, ground is supplied

I to wiper motor terminal 3

I through rear wiper switch terminal 21 and 24

I through body grounds E13 and E41.

Then, power is supplied

I to rear wiper motor terminal 4.

Ground is supplied

I to rear wiper motor terminal 8

I through body grounds B11, B22 and D210.

With power and ground supplied, rear wiper operates at intermittent.

WIPER OPERATION PROHIBIT CONTROL

NAEL0323S02

When glass hatch is open with back door key cylinder while rear wiper is operated, wiper operation is stopped.

(Wiper operation prohibit control)

When glass hatch is closed and rear wiper switch turns from OFF and then rear wiper switch is turned to ON,

wiper operation prohibit control is canceled.

WASHER OPERATION

NAEL0323S03

When the rear wiper switch is turned to WASH position, ground is supplied

I to rear wiper motor terminal 5

I through terminals 23 and 24

I through body grounds E13 and E41.

IDX

REAR WIPER AND WASHER

System Description

EL-165

Loading ...

User Manual - Page 165