Loading ...
Loading ...
Loading ...
POWER SUPPLY AND GROUND CIRCUIT CHECK
=NAEL0397S03
1 CHECK MAIN POWER SUPPLY CIRCUIT FOR SMART ENTRANCE CONTROL UNIT
1. Disconnect smart entrance control unit harness connector.
2. Check voltage between smart entrance control unit harness connector M123 terminal 49 (G/R) or 51 (W/R) and ground.
SEL018Y
Refer to wiring diagram in EL-315.
OK or NG
OK © GO TO 2.
NG © Check the following.
I 40A fusible link (letter f, located in fuse and fusible link box)
I 7.5A fuse [No. 24, located in fuse block (J/B)]
I M145 circuit breaker
I Harness for open or short between smart entrance control unit and fuse
2 CHECK IGNITION SWITCH “ACC” CIRCUIT
1. Disconnect smart entrance control unit harness connector.
2. Check voltage between smart entrance control unit harness connector M122 terminal 26 (G/W) and ground while igni-
tion switch is “ACC”.
SEL019Y
Refer to wiring diagram in EL-315.
OK or NG
OK © GO TO 3.
NG © Check the following.
I 10A fuse [No. 10, located in fuse block (J/B)]
I Harness for open or short between smart entrance control unit and fuse
REMOTE KEYLESS ENTRY SYSTEM
Trouble Diagnoses (Cont’d)
EL-324
Loading ...
Loading ...
Loading ...