Loading ...
Loading ...
Loading ...
ID Code Entry Procedure
=NAEL0398
KEYFOB ID SET UP WITH CONSULT-II
NAEL0398S01
NOTE:
If a keyfob is lost, the ID code of the lost keyfob must be
erased to prevent unauthorized use. When the ID code of a
lost keyfob is not known, all keyfob ID codes should be
erased. After all ID codes are erased, the ID codes of all
remaining and/or new keyfob must be re-registered.
SEL331X
1. Turn ignition switch “OFF”.
2. Connect CONSULT-II to the data link connector.
PBR455D
3. Turn ignition switch “ON”.
4. Touch “START”.
SEL398Y
5. Touch “SMART ENTRANCE”.
SEL401Y
6. Touch “MULTI REMOTE ENT”.
REMOTE KEYLESS ENTRY SYSTEM
ID Code Entry Procedure
EL-334
Loading ...
Loading ...
Loading ...