Loading ...
Loading ...
Loading ...
CONSULT-II Application Item
NAEL0405
“THEFT WAR ALM”
NAEL0405S01
Data Monitor
NAEL0405S0101
Monitored Item Description
IGN ON SW Indicates [ON/OFF] condition of ignition switch.
ACC ON SW Indicates [ON/OFF] condition of ignition switch in ACC position.
KEY CYL LK SW Indicates [ON/OFF] condition of lock signal from key cylinder switch.
KEY CYL UN SW Indicates [ON/OFF] condition of unlock signal from key cylinder switch.
DOOR SW-RR Indicates [ON/OFF] condition of rear door switch.
DOOR SW-DR Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS Indicates [ON/OFF] condition of front door switch RH.
TRUNK SW Indicates [ON/OFF] condition of back door switch.
TRUNK KEY SW Indicates [ON/OFF] condition of back door key cylinder switch.
HOOD SWITCH Indicates [ON/OFF] condition of hood switch.
LOCK SW DR/AS Indicates [ON/OFF] condition of lock signal from door lock/unlock switch LH and RH.
UNLK SW DR/AS Indicates [ON/OFF] condition of unlock signal from door lock/unlock LH and RH.
LK BUTTON/SIG Indicates [ON/OFF] condition of lock signal from keyfob.
UN BUTTON/SIG Indicates [ON/OFF] condition of unlock signal from keyfob.
TRUNK BTN/SIG Indicates [ON/OFF] condition of trunk open signal from keyfob.
NOTE:
Even though TRUNK BTN/SIG is actually displayed on the CONSULT-II screen, it is not equipped, therefore, they cannot be activated.
Active Test
NAEL0405S0102
Test Item Description
THEFT IND
This test is able to check security indicator lamp operation. The lamp will be turned on when
“ON” on CONSULT-II screen is touched.
HORN
This test is able to check vehicle security alarm operation. The alarm will be activated for 0.5
seconds after “ON” on CONSULT-II screen is touched.
HEADLAMP
This test is able to check vehicle security alarm headlamp operation. The headlamp illumi-
nates for 0.5 seconds after “ON” on CONSULT-II screen is touched.
Work Support
NAEL0405S0103
Test Item Description
THEFT ALM TRG
The switch which triggered theft warning alarm is recorded. This mode is able to confirm and
erase the record of theft waning alarm. The trigger data can be erased by touching “CLEAR”
on CONSULT-II screen.
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
VEHICLE SECURITY (THEFT WARNING) SYSTEM
CONSULT-II Application Item
EL-353
Loading ...
Loading ...
Loading ...