Loading ...
Loading ...
Loading ...
DIAGNOSTIC PROCEDURE 12
=NAEL0369S15
(Key, detention, door switch and vehicle speed signal check)
1 CHECK KEY SWITCH INPUT SIGNAL
Check voltage between seat control unit LH terminal 2 and ground.
SEL629W
OK or NG
OK © GO TO 2.
NG © Check the following.
I 7.5A fuse [No. 24, located in fuse block (J/B)]
I Key switch
I Harness for open or short between key switch and fuse
I Harness for open or short between seat control unit LH and key switch
2 CHECK IGNITION SWITCH INPUT SIGNAL (ON AND START)
Check voltage between seat control unit LH terminals and ground.
SEL630W
OK or NG
OK © GO TO 3.
NG © Check the following.
I 7.5A fuse [No. 11, located in fuse block (J/B)]
I 7.5A fuse [No. 26, located in fuse block (J/B)]
I Harness for open or short between seat control unit LH and fuse
AUTOMATIC DRIVE POSITIONER
Trouble Diagnoses (Cont’d)
EL-244
Loading ...
Loading ...
Loading ...