Loading ...
Loading ...
Loading ...
CONSULT-II Application Items
NAEL0453
“HEAD LAMP”
NAEL0453S01
Data Monitor
NAEL0453S0101
Monitored Item Description
IGN ON SW Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW Indicates [ON/OFF] condition of ignition switch in ACC position.
AUTO LIGT SW
Displays status of the lighting switch as judged from the lighting switch signal.
(AUTO position: ON/Other than AUTO position: OFF)
AUTO LIGT SENS
Displays “Illumination outside of the vehicle (close to 5V when light/close to 0V when dark)” as
judged from the optical sensor signal.
LIGHT SW 1ST
Displays status of the lighting switch as judged from the lighting switch signal.
(1ST or 2ND position: ON/Other than 1ST and 2ND position: OFF)
LIGHT SW 2ND
Displays status of the lighting switch as judged from the lighting switch signal.
(2ND position: ON/Other than 2ND position: OFF)
DOOR SW-DR Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS Indicates [ON/OFF] condition of door switch RH.
DOOR SW-RR Indicates [ON/OFF] condition of rear door switch.
Active Test
NAEL0453S0102
Test Item Description
TAIL LAMP Tail lamp relay can be operated by on-off operation of the tail lamp.
HEAD LAMP Headlamp relay can be operated by on-off operation of the headlamp.
AUTO LIGHT Night time dimming signal can be operated by on-off operation.
Work Support
NAEL0453S0103
Work Item Description
AUTO LIGHT SET
Auto light sensitivity can be changed in this mode. Sensitivity can be adjusted in four modes.
I MODE 1 (Normal)/MODE 2 (Sensitive)/MODE 3 (Desensitized)/MODE 4 (Insensitive)
BATTERY SAVER SET
Exterior lamp battery saver control mode can be changed in this mode. Selects exterior lamp
battery saver control mode between two modes.
I MODE 1 (ON)/MODE 2 (OFF)
ILL DELAY SET
Exterior lamp battery saver control time can be changed in this mode. Selects exterior lamp bat-
tery saver control time among eight modes.
I MODE 1 (45 sec.)/MODE 2 (OFF)/MODE 3 (30 sec.)/MODE 4 (60 sec.)/ MODE 5 (90 sec.)/
MODE 6 (120 sec.)/MODE 7 (150 sec.)/MODE 8 (180 sec.)
Trouble Diagnoses
NAEL0260
Symptom Possible cause Repair order
Neither headlamp operates. 1. 7.5A fuse
2. Headlamp relay circuit
3. Lighting switch
4. Smart entrance control unit
1. Check 7.5A fuse [No. 24, located in fuse block
(J/B)].
Verify battery positive voltage is present at terminal
49 of smart entrance control unit.
2. Check between smart entrance control unit and
headlamp relays (LH and RH).
3. Check Lighting switch.
4. Check smart entrance control unit. (EL-378)
HEADLAMP (FOR USA)
CONSULT-II Application Items
EL-40
Loading ...
Loading ...
Loading ...