2002 NISSAN PATHFINDER User Manual

Loading ...

I to smart entrance control unit terminal 3

I through front door switches terminal 3

I to front door switches case grounds, and

I through rear door switches terminal 1

I to rear door switchs case grounds, and

I through back door switch terminal 2

I to back door switch terminal 1

I through body grounds B11, B22 and D210.

When lock/unlock switch LH is LOCK, ground is supplied

I to smart entrance control unit terminal 5

I through lock/unlock switch LH terminal 6, and

I through body grounds M77 and M111.

When lock/unlock switch LH is UNLOCK, ground is supplied

I to smart entrance control unit terminal 4

I through lock/unlock switch LH terminal 19, and

I through body grounds M77 and M111.

Remote controller signal is inputted to smart entrance control unit (The antenna of the system is combined

with smart entrance control unit).

OPERATION

NAEL0392S02

The remote keyless entry system controls operation of the

I power door lock

I auto door lock

I interior lamp

I panic alarm

I hazard and horn reminder

I power window opener

OPERATED PROCEDURE

NAEL0392S03

Power Door Lock Operation

NAEL0392S0301

Smart entrance control unit receives a LOCK signal from keyfob. Smart entrance control unit locks all doors

with input of LOCK signal from keyfob.

When an UNLOCK signal is sent from keyfob once, driver’s door will be unlocked.

Then, if an UNLOCK signal is sent from keyfob again within 5 seconds, all other door will be unlocked.

Select unlock mode can be changed by CONSULT-II (EL-320).

Auto Door Lock Operation

NAEL0392S0308

Auto lock function signal is sent for operation when any of the following signals are not sent within 5 minutes

after the unlock signal is sent from the keyfob:

I when door switch is turned ON for open.

I when the ignition switch is turned ON.

I when the lock signal is sent from the keyfob.

Auto door lock mode can be changed by CONSULT-II (EL-320).

Hazard and Horn Reminder

NAEL0392S0302

Power is supplied at all times

I to horn relay terminals 1 and 3

I through 7.5A fuse (No. 52, located in the fusible link and fuse box), and

I to horn relay terminal 6

I through 10A fuse (No. 54, located in the fusible link and fuse box)

When smart entrance control unit receives LOCK or UNLOCK signal from remote controller with all doors

closed, ground is supplied

I to horn relay terminal 2

I through smart entrance control unit terminal 42, and

I to smart entrance control unit terminals 47 and 48 from hazard warning lamp system.

IDX

REMOTE KEYLESS ENTRY SYSTEM

System Description (Cont’d)

EL-311

Loading ...

User Manual - Page 311