Loading ...
Loading ...
Loading ...
CONSULT-II Application Items
NAEL0457
“MULTI REMOTE ENT”
NAEL0457S01
Data Monitor
NAEL0457S0101
Monitored Item Description
IGN ON SW Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW Indicates [ON/OFF] condition of ignition switch in ACC position.
DOOR SW-RR Indicates [ON/OFF] condition of rear door switch.
KEY ON SW Indicates [ON/OFF] condition of key switch.
DOOR SW-DR Indicates [ON/OFF] condition of front door switch LH.
DOOR SW-AS Indicates [ON/OFF] condition of door switch RH.
LOCK SW DR/AS Indicates [ON/OFF] condition of lock signal from lock/unlock switch LH and RH.
UNLK SW DR/AS Indicates [ON/OFF] condition of unlock signal from lock/unlock switch LH and RH.
KEY CYL LK-SW Indicates [ON/OFF] condition of lock signal from key cylinder switch.
LK BUTTON/SIG Indicates [ON/OFF] condition of lock signal from keyfob.
UN BUTTON/SIG Indicates [ON/OFF] condition of unlock signal from keyfob.
TRUNK BTN/SIG Indicates [ON/OFF] condition of trunk open signal from keyfob.
PANIC BTN Indicates [ON/OFF] condition of panic signal from keyfob.
UN BUTTON ON Indicates [ON/OFF] condition of unlock switch form keyfob.
LK/UN BTN ON Indicates [ON/OFF] condition of lock/unlock signal at the same time from keyfob.
NOTE:
Even though TRUNK BTN/SIG is actually displayed on the CONSULT-II screen, it is not equipped, therefore, they cannot be activated.
Active Test
NAEL0457S0102
Test Item Description
INT/IGN ILLUM This test is able to check interior lamp and ignition key hole illumination operation. The interior
lamp and ignition key hole illumination are turned on when “ON” on CONSULT-II screen is
touched.
HAZARD This test is able to check hazard reminder operation. The hazard lamp turns on when “ON” on
CONSULT-II screen is touched.
TRUNK OUTPUT This test is able to check trunk lid opener actuator operation. The trunk is unlocked when “ON”
on CONSULT-II screen is touched.
HORN This test is able to check panic alarm and horn reminder operations. The alarm activate for 0.5
seconds after “ON” on CONSULT-II screen is touched.
HEAD LAMP This test is able to check headlamps panic alarm operation. The headlamp illuminates for 0.5
seconds after “ON” on CONSULT-II screen is touched.
PW REMOTE DOWN SET This test is able to check power window open operation. The front power windows activate for
10 seconds after “ON” on CONSULT-II screen is touched.
NOTE:
Even though TRUNK OUTPUT is actually displayed on the CONSULT-II screen, it is not equipped, therefore, they cannot be activated.
Work Support
NAEL0457S0103
Test Item Description
REMO CONT ID CONFIR It can be checked whether keyfob ID code is registered or not in this mode.
REMO CONT ID REGIST Keyfob ID code can be registered.
REMO CONT ID ERASUR Keyfob ID code can be erased.
REMOTE KEYLESS ENTRY SYSTEM
CONSULT-II Application Items
EL-320
Loading ...
Loading ...
Loading ...