Loading ...
Loading ...
Loading ...
Symptom Possible cause Repair order
Power sunroof cannot be opened
or closed fully.
1. Full closed position not initial-
ized
2. Sunroof slide mechanism
3. Sunroof switch
4. Sunroof switch circuit
5. Sunroof motor
1. Initialize full closed position.
2. Check the following.
a. Check obstacles in sunroof, etc.
b. Check worn or deformed sunroof.
c. Check sunroof sash tilted too far inward or outward.
3. Check sunroof switch.
4. Check harness between sunroof motor and sunroof
switch.
5. Replace sunroof motor.
Retained power operation does not
operate properly.
1. RAP signal circuit
2. Driver or passenger side door
switch circuit
3. Smart entrance control unit
1. Check RAP signal.
a. (With CONSULT-II)
Check RAP signal with CONSULT-II. Use “ACTIVE
TEST” mode, “RETAINED PWR” in “SMART
ENTRANCE”. (Refer to EL-206.)
If NG, go to the step b. below.
b. Verify 12 positive voltage from smart entrance con-
trol unit is present at terminal 2 of power window
relay:
I Within 45 seconds after ignition switch turns off.
I When front door LH and RH is closed.
2. Check harness between smart entrance control unit
and driver or passenger side door switch.
Check driver or passenger side door switch.
Check driver or passenger side door switch.
3. Check smart entrance control unit. (EL-378)
GI
MA
EM
LC
EC
FE
CL
MT
AT
TF
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
POWER SUNROOF
Trouble Diagnoses (Cont’d)
EL-207
Loading ...
Loading ...
Loading ...