Loading ...
Loading ...
Loading ...
FRONT DOOR KEY CYLINDER SWITCH CHECK
=NAEL0406S06
1 CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL (LOCK/UNLOCK SIGNAL)
With CONSULT-II
Check front door key cylinder switch (“KEY CYL LK-SW”/“KEY CYL UN-SW”) in “DATA MONITOR” mode with CONSULT-
II.
SEL342W
Without CONSULT-II
1. Check the signal between smart entrance control unit harness connector M144 terminal 33 (BR) and ground with oscil-
loscope when key inserted in front key cylinder is turned “LOCK” or “UNLOCK”.
2. Make sure signals which are shown in the figure below can be detected during 10 sec. just after key is turned “LOCK”
or “UNLOCK”.
SEL488Y
Refer to wiring diagram in EL-348.
OK or NG
OK © Door key cylinder switch LH is OK.
NG © GO TO 2.
VEHICLE SECURITY (THEFT WARNING) SYSTEM
Trouble Diagnoses (Cont’d)
EL-364
Loading ...
Loading ...
Loading ...