Loading ...
Loading ...
Loading ...
SEL331X
CONSULT-II
NAEL0417
CONSULT-II INSPECTION PROCEDURE
NAEL0417S01
1. Turn ignition switch OFF.
2. Insert NVIS (NATS) program card into CONSULT-II.
Program card
NATS (AEN00A)
3. Connect CONSULT-II to data link connector.
SEL943X
4. Turn ignition switch ON.
5. Touch “START”.
SEL851W
6. Select “NATS V.5.0”.
SEL363X
7. Perform each diagnostic test mode according to each service
procedure.
For further information, see the CONSULT-II Operation
Manual, IVIS/NVIS.
CONSULT-II DIAGNOSTIC TEST MODE FUNCTION
NAEL0417S02
CONSULT-II DIAGNOSTIC TEST
MODE
Description
C/U INITIALIZATION When replacing any of the following three components, C/U initialization and re-registration
of all NVIS (NATS) ignition keys are necessary.
[NVIS (NATS) ignition key/IMMU/ECM]
SELF-DIAG RESULTS Detected items (screen terms) are as shown in the chart EL-389.
NVIS (NISSAN VEHICLE IMMOBILIZER SYSTEM — NATS)
CONSULT-II
EL-388
Loading ...
Loading ...
Loading ...