Loading ...
Loading ...
Loading ...
Rear seats
Seat backrests
Fig. 79 Folding the seat backrest forwards / inserting the belt into the
opening in the side panel
Before folding the seat backrests forwards, adjust the position of the front
seats in such a way that they are not damaged by the seat backrests. If neces-
sary, remove the rear head restraints » page 88.
Folding forward
›
Push the release lever
A
in the direction of arrow
1
and fold down the seat
backrest in the direction of arrow
2
» Fig. 79.
Folding backwards
›
Pull the seat belt
C
for the side panel in the direction of arrow
3
» Fig. 79.
›
Raise the seat backrest against the direction of arrow
2
until the release
handle
A
audibly locks. Check this by pulling on the seat backrest.
›
Make sure that the red pin
B
is hidden.
WARNING
■
The seat backrests in the occupied rear seats must be properly engaged.
■
When transporting objects in the luggage compartment that has been en-
larged by folding the backrest forward, ensure the safety of the passengers
transported on the rear seat.
■
The seat backrests must be securely latched in position so that no objects
from the luggage compartment can slip into the passenger compartment
under sudden braking – risk of injury.
CAUTION
When operating the seat backrests, the seat belts must not be pinched - there
is a risk of damage to the seat belts.
VarioFlex rear seats
Adjusting the seats
Fig. 80
Adjusting seats in forward/back
direction
Fig. 81
Adjusting the angle of the seat backrest
Move in the longitudinal direction
›
Pull lever
A
in the direction of arrow
1
and move the seat to the desired po-
sition in the direction of arrow
2
» Fig. 80. After releasing the control lever
the latch must engage audibly.
Adjusting the angle of the seat backrest
›
Pull on the loop
B
in the direction of arrow
1
» Fig. 81 and press the seat
backrest in direction of arrow
2
. The locking mechanism must audibly snap
into place.
84
Operation
Loading ...
Loading ...
Loading ...