Loading ...
Loading ...
Loading ...
Switch the temperature synchronisation on/off throughout the entire
interior of the vehicle according to the temperature setting on the
driver's side
a)
Switch Air Care function on/off
Set the auxiliary heater and ventilation
Switch the windscreen heating on/off
a)
Turn on / off the steering wheel heater
a)
Other Climatronic settings
a)
When function is switched on, the symbol in the function surface is green.
Other Climatronic settings
Press the button on the Climatronic control panel → tap the function sur-
face
on the Infotainment screen.
■
AC profile
- Setting the operating performance
during operation (applies
to the Infotainment Swing)
■
Automatic air recirculation
- Automatic re-circulated air mode on/off
■
Automatic supplementary heater
- Quick interior heating on/off
■
Automatic windscreen heating
- Activates/deactivates the automatic windscreen
heating
Climatronic - automatic operation
Read and observe on page 112 first.
The automatic mode is used in order to maintain a constant temperature and
to demist the windows in the interior of the car.
›
To turn on, press the » Fig. 149 on page 113 .
›
To
turn off, press any button for the air distribution or change the blower
speed. The temperature regulation is continued.
Holding the button will turn on automatically.
Operating modes
Automatic mode works in three modes - moderate, medium, and intensive.
Setting the different modes is carried out via the function surface
D
» Fig. 150
on page 114.
After the automatic mode is switched on, Climatronic works in the last selec-
ted mode. The currently selected mode is displayed on the Infotainment
screen.
Air distribution control
Read and observe on page 112 first.
The recirculation mode prevents contaminated outside air getting into the In-
terior of the vehicle. In recirculated air mode air is sucked out of the interior of
the vehicle and then fed back into the interior.
›
To switch on, press the button. The warning light below the button lights
up.
›
To switch off, press the button again. The warning light below the button
goes out.
Heating and manual air conditioning system
If the air distribution control is set to position when the recirculation modes
is switched on, the recirculated-air mode is switched off. By pressing the
button, the air recirculation also in this position can be switched on again.
When the cooling system (button
) is switched on and the temperature reg-
ulator is “turned” to the left, the recirculated-air mode is switched on.
Climatronic
The Climatronic can have a sensor that measures the air recirculation mode
and automatically turns on if there is an increased concentration of pollutants
in the incoming air.
When the pollutant concentration decreases to the normal level, the recircula-
ted air mode is automatically switched off.
Automatic switch-on/switch-off of the air recirculation function can be set on
the Infotainment screen, by pressing the
button on the Climatronic and by
then pressing the function surfaces →
Automatic air recirculation
on the Infotain-
ment screen.
A shut-off of the air recirculation function is carried out by pressing the
button, possibly depending on the moisture conditions in the vehicle interior.
WARNING
The air recirculation cannot be switched on for a longer period of time be-
cause there is no supply of fresh air from the outside. “Stale air” may result
in fatigue in the driver and occupants, reduce attention levels and also
cause the windows to mist up. As soon as the windows mist up, turn the air
recirculation mode off immediately - there is a risk of accident!
115
Heating and ventilation
Loading ...
Loading ...
Loading ...