Loading ...
Loading ...
Loading ...
Operation principle
Fig. 172
Example of screen display
In the voice control main menu » Fig. 171 on page 128 There are basic voice
commands for the individual menus.
Other voice commands are displayed by tapping the respective function sur-
face, if required, by issuing the name of respective command (e.g. navigation).
The screen shows the following » Fig. 172.
Context-dependent:
▶
The system is waiting for a voice command
▶
The system recognises a voice command
▶
The system plays a message
▶
Voice command entry was stopped
Available list entries
Possible voice commands
Display other possible voice commands
Voice commands that can be issued, are indicated in “quotation marks”.
Note
The display of the voice control symbols
A
» Fig. 172 are dependent of the
equipment fitted also on the display of the instrument cluster.
A
B
C
Voice commands
Enter
The voice command must only be issued when the symbol is displayed
and the input tone has completely faded on the Infotainment screen. The in-
put tone can be switched on / off. To do so, tap the
sensor field and then
the function surface →
Voice control
.
It is not necessary to wait for the end of message playback when Infotainment
is playing a message. The Infotainment message can be acknowledged by tap-
ping the
sensor field (does not apply to Infotainment Columbus) or press-
ing the button on the multifunction steering wheel. Then a voice command
can be issued. The voice control is hereby much faster.
Stop
This allows for more time for input of the voice command (e.g. in the list of
visited contacts).
The process for the voice command input can be stopped by moving a finger
up/down across the screen or by turning the controller
(not applicable to In-
fotainment Columbus).
When stopping, the symbol changes from
.
Restore
The procedure for voice command input can be restarted in one of the follow-
ing ways.
▶
By tapping on the function surface
.
▶
By tapping the
sensor field on the Infotainment (does not apply to Info-
tainment Columbus).
▶
By pressing the key on the multifunction steering wheel.
Not recognising a voice command
If a voice command is not detected three times in succession from Infotain-
ment, then the voice control is stopped.
Correction of a voice command input
A voice command can be corrected, modified or re-entered by tapping the
sensor field (does not apply to Infotainment Columbus) or pressing the
button on the multifunction steering wheel. However, this is only possible
as long as the symbol appears on the screen.
You do not have to wait until the voice command is recognised by Infotain-
ment.
129
Infotainment operation
Loading ...
Loading ...
Loading ...